MJ-WQA100 water quality analyzer is developed and manufactured by MJ Instruments.
MJ can further customize the housing to suit special requirements (e.g. Explosion-proof housing)
Multiple customizable parameters in a single unit analyzer lower the initial capital cost of the water quality monitoring solution and the flexibility of a smaller footprint.
Applications include surface water monitoring, seawater monitoring, groundwater monitoring, wastewater plant, pollution control, research studies, rainwater monitoring and etc.
Contact us today to customize your water quality analyzer solution!
Specification:
| Security Management | : | User, admin, super-admin |
| Operation Control | : | Automated, manual |
| Measurement Interval | : | User-defined (time, time-interval, command trigger) |
| Calibration Interval | : | User-defined (time, time-interval, command trigger) |
| Accuracy | : | ± 5% |
| Zero Point Drift | : | 5% |
| Range Drift | : | 5% |
| Signal Output | : | RS483/RS232 Modbus, 4-20mA |
| Fluid Level Alert | : | High, low (reagent, sample, DI water, calibration standard) |
| Abnormality Alert | : | Concentration range, calibration range, heating, leak |
| Sample Pressure | : | Atmospheric |
| Waste Pressure | : | Atmospheric |
| Reagent Storage | : | 10 – 30oC |
| Reagent Replacement | : | 3 – 4 weeks |
| Operating Temperature | : | 5 – 40oC |
| IP Rating | : | IP55 |
| MTBF | : | 720hr |
| Display | : | Colour touchscreen |
| Languages | : | English, Chinese (traditional, simplified) |
| Power Input | : | AC 220V (50/60Hz), AC 110V (50/60Hz), DC 12V |
